Grade | Density | Bending Compression | Hardness | Mechanical and introduction | International Standard |
g/cm3 | MPa | HRA |
YG6A | 14.9 | 1850 | 92 | Fine grain alloy, good wear resistance. Semi finishing of chilled cast iron, non-ferrous metals alloys, semi-finishing and finishing of hardened steel, alloy steel | K10 |
YG6 | 14.8 | 2450 | 90.5 | High wear resistance, high bending strength, used for disc saw blades in electrical line. | K20~K30 |
SH25 | 14.8 | 2200 | 89.5 | High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrous metals and their alloys as well as 。 | K20 |
YG8 | 14.7 | 2320 | 89.5 | The use of high strength, impact resistance, shock resistance higher than SH25, but the wear resistance and cutting speed is low. For cast iron, non-ferrous metals and alloys, non-metal material low speed roughing. | K20 |
YG10X | 14.5 | 2200 | 91 | Fine grain alloy, good wear resistance. Used for processing hard wood, veneer board, PCB,PVC and metals. | K30 |
LS2T | 14.5 | 2480 | 92 | Fine grade alloy, with high wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory | K30 |